Խնամք և Մաքրում

Eli

Please make sure that the stroller is kept clean and dry, including both the coating and the frame. If it becomes soiled or damp, promptly wipe it down, especially the metal parts. Avoid exposure to dirt, sand, or dust. 

Please note that neglecting these steps may cause the product to malfunction, either partially or fully.

• To clean the stroller’s coating, use a damp washcloth or brush with detergent.
• Prolonged exposure to sunlight may cause the materials and fabrics to fade.
• Regularly check the wheels for wear and keep them free of dirt.
• After cleaning, ensure they are dry, and wipe any metal parts with a dry cloth.
• Periodically, remove the wheels from the chassis and brush off any dirt or sand from the axle.
• Avoid submerging the wheel bearings in water.
• Use a brush and water to clean dirt from the wheels.
• Keep in mind that extended sun exposure may alter the stroller’s colors.

Flo

Please make sure that the stroller is kept clean and dry, including both the coating and the frame. If it becomes soiled or damp, promptly wipe it down, especially the metal parts. Avoid exposure to dirt, sand, or dust. 

Please note that neglecting these steps may cause the product to malfunction, either partially or fully.

• To clean the stroller’s coating, use a damp washcloth or brush with detergent.
• Prolonged exposure to sunlight may cause the materials and fabrics to fade.
• Regularly check the wheels for wear and keep them free of dirt.
• After cleaning, ensure they are dry, and wipe any metal parts with a dry cloth.
• Periodically, remove the wheels from the chassis and brush off any dirt or sand from the axle.
• Avoid submerging the wheel bearings in water.
• Use a brush and water to clean dirt from the wheels.
• Keep in mind that extended sun exposure may alter the stroller’s colors.

Mev

Please make sure that the stroller is kept clean and dry, including both the coating and the frame. If it becomes soiled or damp, promptly wipe it down, especially the metal parts. Avoid exposure to dirt, sand, or dust. 

Please note that neglecting these steps may cause the product to malfunction, either partially or fully.

• To clean the stroller’s coating, use a damp washcloth or brush with detergent.
• Prolonged exposure to sunlight may cause the materials and fabrics to fade.
• Regularly check the wheels for wear and keep them free of dirt.
• After cleaning, ensure they are dry, and wipe any metal parts with a dry cloth.
• Periodically, remove the wheels from the chassis and brush off any dirt or sand from the axle.
• Avoid submerging the wheel bearings in water.
• Use a brush and water to clean dirt from the wheels.
• Keep in mind that extended sun exposure may alter the stroller’s colors.

Air-X

Համոզվեք, որ մանկասայլակը մնում է չոր և մաքուր (կտորային հատվածը ու շրջանակը)։ Եթե այն թրջվի կամ խոնավանա, անհրաժեշտ է լավ չորացնել, իսկ մետաղական մասերը մաքրել չոր կտորով։

Խուսափեք կեղտի (ավազ, փոշի և այլն) կուտակումից։ Եթե մանկասայլակը կեղտոտվի, այն հնարավորինս արագ պետք է մաքրել։ Ուշադրություն․ եթե դա չանեք, արտադրանքը կարող է դադարել մասնակի կամ ամբողջական գործել։

Մանկասայլակի նյութերի մաքրումը կարելի է կատարել խոնավ սպունգով կամ խոզանակով՝ օգտագործելով լվացող միջոց։ Կտորային հատվածները հանելու կարիք չկա։

Արեւի երկարատև ազդեցության արդյունքում նյութերի և գործվածքների գույնը կարող է փոխվել։

Հետևեք անիվների մաշվածության մակարդակին և մաքրեք դրանք կեղտից։ Եթե օգտագործում եք փչովի անիվներ, պահպանեք նրանց մեջ 0,8 բար ճնշում։

Մանկասայլակում կա 8 առանցքակալ (յուրաքանչյուր անիվում՝ 2 հատ), որոնք պարբերաբար պետք է մշակել յուղով և պաշտպանել կեղտից ու հեղուկներից։ Եթե դրանց վրա նյութեր հայտնվեն, անհրաժեշտ է դրանք մաքրել, չորացնել և քսել մի քանի կաթիլ յուղ, կաթացնելով առանցքակալի վրա։ Յուղի ավելցուկը մաքրել չոր անձեռոցիկով։

Air-X²

Please ensure that the stroller is kept clean and dry (both the coating and the frame). In case the stroller gets dirty or wet, it should be dried, and the metallic parts be cleaned with a dry cloth. Avoid getting dirt (sand, dust, etc.) on the stroller. 

Please note that if you do not do so, the product can stop functioning either partially or fully.

• The cleaning of the stroller's coating can be done with a wet washcloth or brush and detergent. 
• There is no need to take the coating off. 
• The wear level of wheels should be controlled; the wheels should be cleaned from dirt, they should be dried, while its metal parts should be wiped with a dry cloth. 
• The colors of this stroller's materials and fabrics can change as a result of prolonged exposure to sunlight.

Air-Z

Please ensure that the product is kept clean and dry. In case the product gets dirty or wet, it should be dried, and the metallic parts be cleaned with a dry cloth. Avoid getting dirt (sand, dust, etc.) on the product. 

Please note that if you do not do so, the product can stop functioning either partially or fully.

• The cleaning of the stroller’s coating can be done with a wet washcloth or brush and detergent.
• There is no need to take the coating off.
• The color of materials and textile can fade when exposed to sunlight for a long time.
• The wear level of wheels should be controlled; the wheels should be cleaned from dirt, it should be dried, while its metal parts should be wiped with a dry cloth.
• Periodically, remove the wheels from the chassis and brush off any dirt or sand on the axle of the wheel.
• Do not submerge the wheel bearings in water.
• Use a brush and water to clean dirt on the wheels.
• The colors of this stroller’s materials and fabrics can change as a result of prolonged exposure to sunlight.

Air-Z Plus

Please ensure that the product is kept clean and dry. In case the product gets dirty or wet, it should be dried, and the metallic parts be cleaned with a dry cloth. Avoid getting dirt (sand, dust, etc.) on the product. 

Please note that if you do not do so, the product can stop functioning either partially or fully.

• The cleaning of the stroller’s coating can be done with a wet washcloth or brush and detergent.
• There is no need to take the coating off.
• The color of materials and textile can fade when exposed to sunlight for a long time.
• The wear level of wheels should be controlled; the wheels should be cleaned from dirt, it should be dried, while its metal parts should be wiped with a dry cloth.
• Periodically, remove the wheels from the chassis and brush off any dirt or sand on the axle of the wheel.
• Do not submerge the wheel bearings in water.
• Use a brush and water to clean dirt on the wheels.
• The colors of this stroller’s materials and fabrics can change as a result of prolonged exposure to sunlight.